8 pin dip solid state relay PS7160-2A ps7160l-2a features 2 channel type: (1a + 1a output) designed for ac/dc switching line changer small package: 8 pin dip low offset voltage low led operating current: i f = 2 ma surface mount available description PS7160-2A and ps7160l-2a are solid state relays containing gaas leds on the light emitting side (input side) and mos fets on the output side. they are suitable for analog signal control because of their low offset and high linearity. applications exchange equipment measurement equipment fa/oa equipment part number PS7160-2A, ps7160l-2a symbols parameters units min typ max v f forward voltage, i f = 10 ma v 1.2 1.4 i r reverse current, v r = 5 v a 5.0 i loff off-state leakage current, v d = 600 v a 0.03 1.0 c out output capacitance, v d = 0 v, f = 1 mhz pf/ch 110 r on1 on-state resistance, i f = 10 ma, i l = 10 ma ? 42 50 r on2 i f = 10 ma, i l = 90 ma, t 10 ms ? 33 50 t on turn-on time ms 0.8 1.5 i f = 10 ma, v l = 5 v, r l = 500 ?, pw 10 ms t off turn-off time ms 0.06 0.2 i f = 10 ma, v l = 5 v, r l = 500 ?, pw 10 ms r i-o isolation resistance, v i-o = 1.0 kv ? 10 9 c i-o isolation capacitance, v = 0 v, f = 1 mhz pf/ch 1.1 diode coupled electrical characteristics (t a = 25 c) mos fet 8765 1234 PS7160-2A, ps7160l-2a california eastern laboratories note: 1. test circuit for switching time i f pulse input input monitor v o monitor v l r in r l input 50% 0 v o = 5 v 90% 10% t on t off output
symbols parameters units min typ max i f led operating current ma 2 10 20 v f led off voltage v 0 0.5 symbols parameters units ratings diode i f forward current (dc) ma 50 v r reverse voltage v 5.0 p d power dissipation mw/ch 50 i fp peak foward current 2 a1 mosfet v l break down voltage v 600 i l continuous load current ma 90 i lp pulse load current 3 ma 250 (ac/dc connection) p out power dissipation mw/ch 375 coupled bv isolation voltage 4 vr.m.s. 1500 p t total power dissipation mw 850 t a operating ambient temp. c -40 to +80 t stg storage temperature c -40 to +100 absolute maximum ratings 1 (t a = 25 c) recommended operating conditions (t a = 25 c) notes: 1. operation in excess of any one of these parameters may result in permanent damage. 2. pw = 100 s, duty cycle = 1 % 3. pw = 100 ms, 1 shot. 4. ac voltage for 1 minute at t a = 25 c, rh = 60 % between input and output. PS7160-2A, ps7160l-2a part number PS7160-2A,ps7160l-2a outline dimensions (units in mm) PS7160-2A ps7160l-2a pin connection (top view) PS7160-2A, ps7160l-2a 1. led anode 1 2. led cathode 1 3. led anode 2 4. led cathode 2 5. mos fet 2 6. mos fet 2 7. mos fet 1 8. mos fet 1 8765 1234 9.25 0.5 0.25 m 1.34 0.10 0.50 0.10 2.54 7.62 0 to 15 ? 3.5 0.3 3.3 0.3 4.15 0.3 6.5 0.5 12 34 87 6 5 1.340.1 2.54 3.50.3 6.50.5 9.250.5 0.90.25 0.10 +0.10 -0.05 9.600.4 1234 876 5 part number package packing style PS7160-2A 8 pin dip magazine cae 50 pcs ps7160l-2a ps7160l-2a-e3 embossed tape 1000 pcs/reel ps7160l-2a-e4 ordering information
max forward current vs. ambient temperature max forward current, i f (ma) ambient temperature, t a ( c) ambient temperature, t a ( c) forward voltage, v f (v) normalized on-state resistance vs. ambient temperature ambient temperature, t a ( c) normalized on-state resistance, r on max load current vs. ambient temperature max load current, i l (ma) on-state resistance, r on ( ? ) output capacitance, (pf) on-state distribution supply voltage, v cc (v) number (pcs) ambient temperature, t a ( c) output capacitance vs. supply voltage forward voltage vs. ambient temperature typical performance curves (t a = 25 c) PS7160-2A, ps7160l-2a 100 80 60 40 20 0 025 -25 50 75 80 100 150 125 100 50 75 25 0 025 -25 50 75 80 100 1.6 1.4 1.2 1.0 0.8 025 -25 50 75 100 i f = 50 ma 30 ma 20 ma 10 ma 5 ma 1 ma 250 200 150 100 50 0 20 40 60 80 100 120 f = 1 mhz normalized to 1.0 at t a = 25 c i f = 10 ma i l = 10 ma 3.0 2.5 2.0 1.5 1.0 0.5 0 -25 0255075 100 30 25 15 20 10 5 0 42 41 43 n = 50 pcs i f = 5 ma i l = 1 ma
off-state leakage current vs. supply voltage off-state leakage current, i loff (a) supply voltage, v cc (v) turn-on time, t on (ms) forward current, i f (ma) turn-on time vs. forward current load current vs. load voltage load current, i l (ma) load voltage, v l (v) turn-off time, t off (ms) forward current, i f (ma) turn-off time vs. forward current typical performance curves (t a = 25 c) PS7160-2A, ps7160l-2a turn-on time, t on (ms) turn-on time distribution number (pcs) turn-off time, t off (ms) turn-off time distribution number (pcs) 100 200 300 400 500 600 0 10 -9 10 -8 10 -7 10 -6 10 -5 10 -3 10 -4 t a = 80 c t a = 25 c i f = 10 ma v l = 5 v r l = 500 ? 8.0 6.0 4.0 2.0 0 10 20 30 40 i f = 10 ma v l = 5 v r l = 500 ? 0.5 0.4 0.3 0.1 0.2 0 10 20 30 40 30 25 15 20 10 5 0 0.8 0.6 0.7 0.9 1.0 n = 50 pcs i f = 10 ma v l = 5 v r l = 500 ? 30 25 15 20 10 5 0 0.04 0.08 n = 50 pcs i f = 10 ma v l = 5 v r l = 500 ? -100 -150 150 -2.0 -4.0 4.0 2.0 -50 50 100 0 i f = 10 ma
normalized turn-on time vs. ambient temperature normalized turn-on time, t on ambient temperature, t a ( c) normalized turn-off time vs. ambient temperature normalized turn-off time, t off ambient temperature, t a ( c) typical performance curves (t a = 25 c) PS7160-2A, ps7160l-2a normalized to 1.0 at t a = 25 c i f = 10 ma v l = 5 v r l = 500 ? 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 0 25 50 75 100 normalized to 1.0 at t a = 25 c i f = 10 ma v l = 5 v r l = 500 ? 3.0 2.5 2.0 1.5 1.0 0.5 0.0 -25 0255075100 taping specifications (units in mm) outline and dimensions (reel) packaging : 1000 pcs/reel outline and dimensions (tape) taping direction ps7160l-2a-e3 ps7160l-2a-e4 4.0 0.1 2.0 0.1 1.55 0.1 1.55 0.1 10.4 0.1 1.75 0.1 7.5 0.1 16.0 0.3 4.3 0.2 0.3 10.3 0.1 12.0 0.1 2.0 0.5 13.0 0.5 21.0 0.3 r 10 16.4 80.0 5.0 330 +2.0 - 0.0
recommended soldering conditions (1) infrared reflow soldering peak reflow temperature 235 c or below (package surface temperature) time of temperature higher than 210 c 30 seconds or less number of reflows two flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) recommended temperature profile of infrared reflow (2) dip soldering temperature 260 c or below (molten solder temperature) time 10 seconds or less number of times one flux rosin flux containing small amount of chlorine (the flux with a maximum chlorine content of 0.2 wt % is recommended.) (3) cautions fluxes avoid removing the residual flux with freon-based cleaning solvent. time (s) package surface temperature t ( ? c) 100 to 160 ? c 60 to 120 s (preheating) (heating) to 10 s to 30 s 235 ? c (peak temperature) 210 ? c PS7160-2A, ps7160l-2a exclusive north american agent for rf, microwave & optoelectronic semiconductors california eastern laboratories ?headquarters ?4590 patrick henry drive ?santa clara, ca 95054-1817 ?(408) 988-3500 ?telex 34-6393 ?fax (408) 988-0279 24-hour fax-on-demand: 800-390-3232 (u.s. and canada only) ?internet: http://www.cel.com 07/29/2001 data su bject to change without notice
|
